SKF 6200 Bearing

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

34 mm x 67 mm x 37 mm Fersa F16083 angular contact ball bearings

34 mm x 67 mm x 37 mm Fersa F16083 angular contact ball bearings: α : 6 °; l5 ≈ : 35 mm

37 mm x 139 mm x 45 mm Fersa F16033 angular contact ball bearings

37 mm x 139 mm x 45 mm Fersa F16033 angular contact ball bearings: Basic Static Radial Load Rating 40 AA Pair Co1 : 285000 N; Basic Static Radial Load Rating 15 B Bearing Co2 : 108000 N

40 mm x 75 mm x 37 mm Fersa F16055 angular contact ball bearings

40 mm x 75 mm x 37 mm Fersa F16055 angular contact ball bearings: B : 18.00 mm; D : 30.0000 mm

60 mm x 130 mm x 31 mm SIGMA QJ 312 angular contact ball bearings

60 mm x 130 mm x 31 mm SIGMA QJ 312 angular contact ball bearings: h : 15 mm; B5 : 77 mm

65 mm x 140 mm x 33 mm SIGMA 7313-B angular contact ball bearings

65 mm x 140 mm x 33 mm SIGMA 7313-B angular contact ball bearings: Oil Speed Rating n2 : 8800 rpm; Basic Static Radial Load Rating Co : 26000 N

25 mm x 52 mm x 20,6 mm SIGMA 3205 angular contact ball bearings

25 mm x 52 mm x 20,6 mm SIGMA 3205 angular contact ball bearings: Lock nut : N 068; Threads per inch : 5

177,8 mm x 304,8 mm x 44,45 mm SIGMA LJT 7 angular contact ball bearings

177,8 mm x 304,8 mm x 44,45 mm SIGMA LJT 7 angular contact ball bearings: Design variant/feature : TQOS/GW; D1 ≈ : 281 mm

190,5 mm x 317,5 mm x 44,45 mm SIGMA LJT 7.1/2 angular contact ball bearings

190,5 mm x 317,5 mm x 44,45 mm SIGMA LJT 7.1/2 angular contact ball bearings: L : 558.8 mm; P60° : 345 kN

45 mm x 100 mm x 38,7 mm ZEN S5309 angular contact ball bearings

45 mm x 100 mm x 38,7 mm ZEN S5309 angular contact ball bearings: Grease Speed Rating Open/Shielded n1 : 8500 rpm; Accessories : Seal & Snap-Ring

17 mm x 47 mm x 22,2 mm ZEN 5303-2RS angular contact ball bearings

17 mm x 47 mm x 22,2 mm ZEN 5303-2RS angular contact ball bearings: PG : 1/8 NPT; Appropriate attachment bolt size G : 0.625 in

15 mm x 35 mm x 15,9 mm ZEN S3202 angular contact ball bearings

15 mm x 35 mm x 15,9 mm ZEN S3202 angular contact ball bearings: G : 378.993 mm; Hydraulic nut : HMVC 76E

35 mm x 72 mm x 27 mm ZEN S3207-2RS angular contact ball bearings

35 mm x 72 mm x 27 mm ZEN S3207-2RS angular contact ball bearings: Basic Dynamic Radial Load Rating C : 95600 N; D : 130.0000 mm