SKF 6200 Bearing

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

110 mm x 150 mm x 20 mm SNFA VEB 110 /S/NS 7CE3 angular contact ball bearings

110 mm x 150 mm x 20 mm SNFA VEB 110 /S/NS 7CE3 angular contact ball bearings: A1 : 123.825 mm; J min. : 266.7 mm

70 mm x 125 mm x 24 mm SNFA E 270 7CE1 angular contact ball bearings

70 mm x 125 mm x 24 mm SNFA E 270 7CE1 angular contact ball bearings: Oil Speed Rating Open/Shielded n2 : 28000 rpm; d : 15.000 mm

110 mm x 150 mm x 20 mm SNFA VEB 110 /NS 7CE3 angular contact ball bearings

110 mm x 150 mm x 20 mm SNFA VEB 110 /NS 7CE3 angular contact ball bearings: da min. : 124 mm; s max. : 7.5 mm

120 mm x 215 mm x 40 mm SNFA E 200/120 7CE1 angular contact ball bearings

120 mm x 215 mm x 40 mm SNFA E 200/120 7CE1 angular contact ball bearings: Accessories : Shield & Seal; Grease Speed Rating n1 : 3800 rpm

30 mm x 55 mm x 13 mm SNFA VEX 30 7CE1 angular contact ball bearings

30 mm x 55 mm x 13 mm SNFA VEX 30 7CE1 angular contact ball bearings: Adapter sleeve assembly : SNW 144x7.7/8; P150° : 145 kN

17 mm x 40 mm x 12 mm SNFA E 217 /S /S 7CE3 angular contact ball bearings

17 mm x 40 mm x 12 mm SNFA E 217 /S /S 7CE3 angular contact ball bearings: G : M 200x3; Mass bearing + sleeve : 39.5 kg

9 mm x 26 mm x 8 mm SNFA E 209 7CE3 angular contact ball bearings

9 mm x 26 mm x 8 mm SNFA E 209 7CE3 angular contact ball bearings: Basic Radial Load Rating-Dynamic DC : 91300 N; d : 60.000 mm

35 mm x 62 mm x 14 mm SNFA VEX 35 7CE3 angular contact ball bearings

35 mm x 62 mm x 14 mm SNFA VEX 35 7CE3 angular contact ball bearings: ra max. : 2 mm; C : 61.9 mm

90 mm x 140 mm x 24 mm SNFA HX90 /S/NS 7CE1 angular contact ball bearings

90 mm x 140 mm x 24 mm SNFA HX90 /S/NS 7CE1 angular contact ball bearings: d : 280 mm; Grease : 4940 kN

120 mm x 215 mm x 40 mm SNFA E 200/120 /S 7CE3 angular contact ball bearings

120 mm x 215 mm x 40 mm SNFA E 200/120 /S 7CE3 angular contact ball bearings: with tapered bore : 1 400 min-1; D : 290 mm

20 mm x 32 mm x 7 mm SNFA SEA20 7CE3 angular contact ball bearings

20 mm x 32 mm x 7 mm SNFA SEA20 7CE3 angular contact ball bearings: Basic dynamic load rating C : 1010 kN; Da max. : 1372 mm

100 mm x 180 mm x 34 mm SNFA E 200/100 /S 7CE3 angular contact ball bearings

100 mm x 180 mm x 34 mm SNFA E 200/100 /S 7CE3 angular contact ball bearings: Fatigue load limit Pu : 1.53 kN; Radial shaft seal with a low cross-sectional height, single lip : G 12x16x3