plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- 3 mm x 10 mm x 3 mm NMB MBT3V plain bearings
- 31
- Black Oxide Coating
- 8 mm x 19 mm x 8 mm NMB MBT8V plain bearings
- Yes (with retaining
- Deep Groove Ball Bea
- 28 mm x 62 mm x 28 mm NMB RBT28E plain bearings
- 417 kN
- 51 mm
- 28 mm x 60 mm x 28 mm NMB MBW28CR plain bearings
- Bearing Steel
- J7
- 14 mm x 27,5 mm x 14 mm NMB MBT14V plain bearings
- Cast Iron
- No
- 6 mm x 20,5 mm x 6 mm NMB HR6 plain bearings
- Split Cylindrical Ho
- 4.4 in
- 17 mm x 41 mm x 17 mm NMB HRT17 plain bearings
- 34 mm
- 3.18 mm
- 28 mm x 75 mm x 28 mm NMB HRT28E plain bearings
- Available
- Deep Groove Ball Bea
- 15 mm x 29 mm x 15 mm NMB MBW15CR plain bearings
- N/A
- Roller Bearings
- 14 mm x 27,5 mm x 14 mm NMB MBT14 plain bearings
- N (Standard Cover)
- Double
- 8 mm x 18 mm x 8 mm NMB MBY8VCR plain bearings
- 95.250 mm
- 1.74