plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- Toyana TUF1 40.400 plain bearings
- 82.6 mm
- SCC207
- Toyana SAL22T/K plain bearings
- Inch Base
- J type
- Toyana GW 240 plain bearings
- 223K and 232K
- AN-40
- Toyana SI16T/K plain bearings
- Grade 0
- With Outer Ring
- Toyana GE 016 XES-2RS plain bearings
- 50200 lbf
- 20.31 in
- 50 mm x 90 mm x 56 mm SKF GEH 50 ESX-2LS plain bearings
- 0.440 in
- Stamped Steel
- 3 mm x 16 mm x 3 mm NMB HRT3E plain bearings
- 35 mm
- 3.18 mm
- 15 mm x 29 mm x 15 mm NMB MBG15CR plain bearings
- 4.000 mm
- 4.000 mm
- 4 mm x 12 mm x 4 mm NMB MBY4CR plain bearings
- 6
- ZZ (Double Shield)
- 28 mm x 75 mm x 28 mm NMB HR28 plain bearings
- 0.0016
- 0.083 in
- 12 mm x 30 mm x 12 mm NMB PR12E plain bearings
- Cylindrical Bore Set
- Bearing unit