angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 39 mm x 72 mm x 37 mm SNR GB41599.R02 angular contact ball bearings
- 2 x 1/2-13 UNC
- 129.794 mm
- 25 mm x 52 mm x 30 mm SNR 7205HG1DUJ74 angular contact ball bearings
- 1.00 mm
- 10000 rpm
- 75 mm x 130 mm x 41,3 mm NKE 3215-B-TV angular contact ball bearings
- 1040 N
- 12.000 mm
- AST 7236AC angular contact ball bearings
- 5600 rpm
- 34.90 mm
- 55 mm x 100 mm x 33,3 mm ISB 3211-2RS angular contact ball bearings
- Two Seals & Snap-Rin
- 4500 rpm
- 460 mm x 680 mm x 100 mm ISB QJ 1092 angular contact ball bearings
- 97.5 kg
- 176.213 mm