plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- 20 mm x 35 mm x 16 mm ISO GE 020 ES plain bearings
- 11.2 kN
- 1.01 kg
- 750 mm x 1000 mm x 335 mm ISO GE 750 ES plain bearings
- 217 kN
- 24.7 kN
- 10 mm x 30 mm x 7,9 mm ISO GW 010 plain bearings
- No
- 304 Stainless Steel
- 140 mm x 260 mm x 61 mm ISO GW 140 plain bearings
- Radial
- Grade 0
- 220 mm x 370 mm x 82 mm ISO GW 220 plain bearings
- UK209G2H-23
- 50 mm
- 17 mm x 32 mm x 14 mm ISO GE17XDO-2RS plain bearings
- 1.67
- 0.130 in
- Toyana TUP2 55.50 plain bearings
- 94
- Round Type
- Toyana GE 090 XES plain bearings
- Steel
- Steel
- Toyana GE 050 ES-2RS plain bearings
- 20 ～ 30
- 10 ～ 20
- Toyana TUP1 45.50 plain bearings
- =Bearings1_Inside Ri
- 18.3 mm
- Toyana TUP1 70.70 plain bearings
- 43.55 kN
- 100 °C