SKF 6200 Bearing

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

45 mm x 100 mm x 25 mm SKF QJ 309 N2PHAS angular contact ball bearings

45 mm x 100 mm x 25 mm SKF QJ 309 N2PHAS angular contact ball bearings: Mass bearing pair : 12.7 kg; Da max. : 203 mm

45 mm x 85 mm x 19 mm SKF 7209 CD/HCP4A angular contact ball bearings

45 mm x 85 mm x 19 mm SKF 7209 CD/HCP4A angular contact ball bearings: da : 201.613 mm; P150° : 145 kN

40 mm x 90 mm x 36,5 mm SKF 3308DTN9 angular contact ball bearings

40 mm x 90 mm x 36,5 mm SKF 3308DTN9 angular contact ball bearings: Bearing : 22217 EK; P150° : 28.5 kN

190 mm x 290 mm x 46 mm SKF 7038 CD/P4A angular contact ball bearings

190 mm x 290 mm x 46 mm SKF 7038 CD/P4A angular contact ball bearings: Basic Static Radial Load Rating Co : 440000 N; d : 190.000 mm

50 mm x 72 mm x 12 mm SKF S71910 CB/HCP4A angular contact ball bearings

50 mm x 72 mm x 12 mm SKF S71910 CB/HCP4A angular contact ball bearings: J max. : 368.3 mm; ba : 53.181 mm

8 mm x 22 mm x 7 mm SKF 708 CE/P4AH angular contact ball bearings

8 mm x 22 mm x 7 mm SKF 708 CE/P4AH angular contact ball bearings: Basic Dynamic Radial Load Rating C : 216000 N; Oil Speed Rating Open/Shielded n2 : 2400 rpm

50 mm x 90 mm x 20 mm SKF S7210 CD/P4A angular contact ball bearings

50 mm x 90 mm x 20 mm SKF S7210 CD/P4A angular contact ball bearings: P120° : 73.8 kN; Cap bolt recommended tightening torque : 1220 N·m

105 mm x 145 mm x 20 mm SKF S71921 CD/P4A angular contact ball bearings

105 mm x 145 mm x 20 mm SKF S71921 CD/P4A angular contact ball bearings: d1 : 98 mm; Recommended grub screw tightening torque : 18 N·m

35 mm x 55 mm x 10 mm SKF 71907 ACE/P4AL angular contact ball bearings

35 mm x 55 mm x 10 mm SKF 71907 ACE/P4AL angular contact ball bearings: B : 41 mm; r1,2 min. : 6 mm

45 mm x 75 mm x 16 mm SKF S7009 FW/HC angular contact ball bearings

45 mm x 75 mm x 16 mm SKF S7009 FW/HC angular contact ball bearings: D : 65.0000 mm; Oil Speed Rating Open/Shielded n2 : 11000 rpm

35 mm x 55 mm x 10 mm NTN 5S-7907ADLLBG/GNP42 angular contact ball bearings

35 mm x 55 mm x 10 mm NTN 5S-7907ADLLBG/GNP42 angular contact ball bearings: Basic Static Radial Load Rating Co : 12900 N; d : 30.000 mm

75 mm x 105 mm x 16 mm NTN 5S-7915UADG/GNP42 angular contact ball bearings

75 mm x 105 mm x 16 mm NTN 5S-7915UADG/GNP42 angular contact ball bearings: r, r1,2 min. : 1.5 mm; d : 190 mm