SKF 6200 Bearing

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

45 mm x 84 mm x 42 mm FAG SA0050 angular contact ball bearings

45 mm x 84 mm x 42 mm FAG SA0050 angular contact ball bearings: PosiTrac Plus contact element : 2 x B10724-122; Eye bolt : 2 x 3/8-16 UNC

43 mm x 82 mm x 37 mm FAG 567519A angular contact ball bearings

43 mm x 82 mm x 37 mm FAG 567519A angular contact ball bearings: Dynamic (Ca) : 48.2 kN; Pu : 5.770 kN

95 mm x 130 mm x 18 mm FAG B71919-C-T-P4S angular contact ball bearings

95 mm x 130 mm x 18 mm FAG B71919-C-T-P4S angular contact ball bearings: Pa : 27.4 kN; L : 419.1 mm

15 mm x 42 mm x 25 mm INA ZKLFA1563-2Z angular contact ball bearings

15 mm x 42 mm x 25 mm INA ZKLFA1563-2Z angular contact ball bearings: G : 54.788 mm; Sleeve : S 111x2

12 mm x 35,45 mm x 20 mm INA ZKLR1244-2RS angular contact ball bearings

12 mm x 35,45 mm x 20 mm INA ZKLR1244-2RS angular contact ball bearings: Fillet Radius ra : 1.00 mm; Accessories : One Shield

110 mm x 240 mm x 50 mm NACHI 7322DT angular contact ball bearings

110 mm x 240 mm x 50 mm NACHI 7322DT angular contact ball bearings: Mass inner ring : 0.34 kg; r, r1,2 min. : 1 mm

NACHI F30BVV09-3 angular contact ball bearings

NACHI F30BVV09-3 angular contact ball bearings: D : 90.0000 mm; Basic Dynamic Radial Load Rating C : 44200 N

40 mm x 62 mm x 20.625 mm NACHI 40BGS8G-2DL angular contact ball bearings

40 mm x 62 mm x 20.625 mm NACHI 40BGS8G-2DL angular contact ball bearings: d : 670 mm; r1,2 min. : 4 mm

12 mm x 24 mm x 6 mm NACHI 7901AC angular contact ball bearings

12 mm x 24 mm x 6 mm NACHI 7901AC angular contact ball bearings: Basic Static Radial Load Rating Co : 173000 N; d : 170.000 mm

105 mm x 190 mm x 36 mm NACHI 7221 angular contact ball bearings

105 mm x 190 mm x 36 mm NACHI 7221 angular contact ball bearings: Fillet Radius ra : 3.00 mm; Oil Speed Rating n2 : 1400 rpm

10 mm x 30 mm x 9 mm NACHI 7200BDB angular contact ball bearings

10 mm x 30 mm x 9 mm NACHI 7200BDB angular contact ball bearings: Calculation factor kr : 0; D1 ≈ : 275.6 mm

85 mm x 180 mm x 41 mm NACHI 7317DB angular contact ball bearings

85 mm x 180 mm x 41 mm NACHI 7317DB angular contact ball bearings: Basic dynamic load rating C : 2642 kN; Basic static load rating C0 : 5700 kN