SKF 6200 Bearing

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

ILJIN IJ143009 angular contact ball bearings

ILJIN IJ143009 angular contact ball bearings: Appropriate attachment bolt size G : 1 in; Cap bolt, SAE grade : 5

ILJIN IJ113030 angular contact ball bearings

ILJIN IJ113030 angular contact ball bearings: Fillet Radius ra : 1.00 mm; D : 72.0000 mm

ILJIN IJ113046 angular contact ball bearings

ILJIN IJ113046 angular contact ball bearings: d : 90.000 mm; Grease Speed Rating n1 : 2400 rpm

35 mm x 62 mm x 18.5 mm KBC BS35-PHAUU angular contact ball bearings

35 mm x 62 mm x 18.5 mm KBC BS35-PHAUU angular contact ball bearings: Basic dynamic load rating C : 7.15 kN; Preload class B GB : 193 N

50 mm x 110 mm x 27 mm KBC 7310B angular contact ball bearings

50 mm x 110 mm x 27 mm KBC 7310B angular contact ball bearings: Sealed Speed Rating n3 : 3800 rpm; d : 60.000 mm

320 mm x 456 mm x 118.2 mm KBC SDA0107 angular contact ball bearings

320 mm x 456 mm x 118.2 mm KBC SDA0107 angular contact ball bearings: Grease : 842 kN; Dynamic (Cr) : 4.5 mm

30 mm x 55 mm x 13 mm KBC SM7006CP5 angular contact ball bearings

30 mm x 55 mm x 13 mm KBC SM7006CP5 angular contact ball bearings: G : M 30x2; d : 30 mm

30 mm x 52 mm x 22 mm KBC SDA9102 DDY2 angular contact ball bearings

30 mm x 52 mm x 22 mm KBC SDA9102 DDY2 angular contact ball bearings: Initial grease fill : 3515.4 g; P180° : 267 kN

31,7 mm x 62 mm x 16 mm RHP 16/LJT1.1/4 angular contact ball bearings

31,7 mm x 62 mm x 16 mm RHP 16/LJT1.1/4 angular contact ball bearings: A : 48 mm; Hexagonal key size for grub screw N : 3.969 mm

31.75 mm x 79,375 mm x 22,225 mm RHP QJM1.1/4 angular contact ball bearings

31.75 mm x 79,375 mm x 22,225 mm RHP QJM1.1/4 angular contact ball bearings: Basic Dynamic Radial Load Rating C : 48800 N; Grease Speed Rating n1 : 5300 rpm

15,875 mm x 39,6875 mm x 10,31875 mm RHP LJT5/8 angular contact ball bearings

15,875 mm x 39,6875 mm x 10,31875 mm RHP LJT5/8 angular contact ball bearings: Basic Static Radial Load Rating Co : 108000 N; B : 43.00 mm

28,575 mm x 63,5 mm x 15,875 mm RHP LJT1.1/8 angular contact ball bearings

28,575 mm x 63,5 mm x 15,875 mm RHP LJT1.1/8 angular contact ball bearings: Oil : 3 800 min-1; Grease : 1.230 kN