SKF 6200 Bearing

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

50 mm x 90 mm x 20 mm CYSD 7210C angular contact ball bearings

50 mm x 90 mm x 20 mm CYSD 7210C angular contact ball bearings: G1 : 32 mm; Mass withdrawal sleeve : 34.5 kg

55 mm x 120 mm x 29 mm CYSD QJF311 angular contact ball bearings

55 mm x 120 mm x 29 mm CYSD QJF311 angular contact ball bearings: R2 : 22.225 mm; Cap bolt : 2 x 5/8-11 UNC

17 mm x 47 mm x 14 mm CYSD 7303CDT angular contact ball bearings

17 mm x 47 mm x 14 mm CYSD 7303CDT angular contact ball bearings: Fillet Radius ra : 0.64 mm; d : 12.000 mm

45 mm x 68 mm x 12 mm CYSD 7909CDT angular contact ball bearings

45 mm x 68 mm x 12 mm CYSD 7909CDT angular contact ball bearings: Oil Speed Rating n2 : 21000 rpm; B : 21.00 mm

95 mm x 170 mm x 32 mm CYSD 7219DB angular contact ball bearings

95 mm x 170 mm x 32 mm CYSD 7219DB angular contact ball bearings: C : 18 mm; Dynamic (Ca) : 43.8 kN

85 mm x 150 mm x 28 mm CYSD 7217B angular contact ball bearings

85 mm x 150 mm x 28 mm CYSD 7217B angular contact ball bearings: Locking device : MB 52; d1 : 240 mm

150 mm x 270 mm x 45 mm CYSD 7230CDF angular contact ball bearings

150 mm x 270 mm x 45 mm CYSD 7230CDF angular contact ball bearings: Oil Speed Rating Open/Shielded n2 : 1500 rpm; d : 340.000 mm

170 mm x 260 mm x 42 mm CYSD 7034DF angular contact ball bearings

170 mm x 260 mm x 42 mm CYSD 7034DF angular contact ball bearings: Calculation factor Y0 : 2.5; B4 : 28 mm

140 mm x 300 mm x 62 mm CYSD 7328BDT angular contact ball bearings

140 mm x 300 mm x 62 mm CYSD 7328BDT angular contact ball bearings: s : 36.513 mm; Basic dynamic load rating C : 253 kN

30 mm x 72 mm x 19 mm CYSD 7306BDF angular contact ball bearings

30 mm x 72 mm x 19 mm CYSD 7306BDF angular contact ball bearings: Eye bolt : 2 x 3/8-16 UNC; H2 : 66.675 mm

42 mm x 84 mm x 39 mm CYSD DAC4284039 angular contact ball bearings

42 mm x 84 mm x 39 mm CYSD DAC4284039 angular contact ball bearings: Basic Static Radial Load Rating Co : 4150 N; Oil Speed Rating n2 : 31000 rpm

70 mm x 110 mm x 20 mm SNR MLE7014HVDUJ74S angular contact ball bearings

70 mm x 110 mm x 20 mm SNR MLE7014HVDUJ74S angular contact ball bearings: R2 : 46.831 mm; Da : 399.999 mm