angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 80 mm x 140 mm x 44,4 mm NTN 5216S angular contact ball bearings
- 9 mm
- 516.479 mm
- 90 mm x 160 mm x 30 mm NTN 7218BDF angular contact ball bearings
- 37500 N
- 1.00 mm
- 15 mm x 35 mm x 11 mm NTN 7202DT angular contact ball bearings
- 1560 kN
- 850 r/min
- 20 mm x 42 mm x 12 mm NTN 7004UG/GNP4 angular contact ball bearings
- 4.3438 in
- 0.4375 in
- 230,000 mm x 329,500 mm x 40,000 mm NTN SF4614 angular contact ball bearings
- 1-8 UNC
- 309.999 mm
- PSL PSL 212-306 angular contact ball bearings
- 420 mm
- 1430 kN
- ILJIN IJ223064 angular contact ball bearings
- PL 560
- 609.6 mm
- ILJIN IJ223024 angular contact ball bearings
- M 190x3
- 0.107
- ILJIN IJ123007 angular contact ball bearings
- 9 mm
- 200 mm