SKF 6200 Bearing

angular contact ball bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

95 mm x 200 mm x 45 mm CYSD 7319CDB angular contact ball bearings

95 mm x 200 mm x 45 mm CYSD 7319CDB angular contact ball bearings: d : 90.000 mm; Basic Static Radial Load Rating Co : 196000 N

45 mm x 68 mm x 12 mm CYSD 7909DB angular contact ball bearings

45 mm x 68 mm x 12 mm CYSD 7909DB angular contact ball bearings: Oil Speed Rating Open/Shielded n2 : 2400 rpm; Fillet Radius ra : 2.00 mm

95 mm x 130 mm x 18 mm CYSD 7919DT angular contact ball bearings

95 mm x 130 mm x 18 mm CYSD 7919DT angular contact ball bearings: ra : 1.5 max; D : 80 mm

40 mm x 74 mm x 40 mm SNR GB43516S01 angular contact ball bearings

40 mm x 74 mm x 40 mm SNR GB43516S01 angular contact ball bearings: Grease : 36950 kN; Static (Cor) : 22.3 mm

70 mm x 100 mm x 16 mm SNR ML71914HVUJ74S angular contact ball bearings

70 mm x 100 mm x 16 mm SNR ML71914HVUJ74S angular contact ball bearings: B : 74.00 mm; Sealed Speed Rating n3 : 730 rpm

SNR TGB35278 angular contact ball bearings

SNR TGB35278 angular contact ball bearings: Basic dynamic load rating C : 220 kN; ra max. : 1.5 mm

20 mm x 42 mm x 24 mm SNR ML7004HVDUJ74S angular contact ball bearings

20 mm x 42 mm x 24 mm SNR ML7004HVDUJ74S angular contact ball bearings: B : 49.20 mm; Basic Static Radial Load Rating Co : 122000 N

200 mm x 280 mm x 76 mm SNR 71940HVDUJ74 angular contact ball bearings

200 mm x 280 mm x 76 mm SNR 71940HVDUJ74 angular contact ball bearings: Calculation factor f1 : 1; Calculation factor fHC : 1

30 mm x 47 mm x 9 mm SNR 71906HVUJ74 angular contact ball bearings

30 mm x 47 mm x 9 mm SNR 71906HVUJ74 angular contact ball bearings: Fillet Radius ra : 0.79 mm; Sealed Speed Rating n3 : 6200 rpm

35 mm x 72 mm x 34 mm SNR 7207CG1DUJ74 angular contact ball bearings

35 mm x 72 mm x 34 mm SNR 7207CG1DUJ74 angular contact ball bearings: D : 580.0000 mm; Sealed Speed Rating n3 : 0 rpm

15 mm x 28 mm x 14 mm SNR ML71902CVDUJ74S angular contact ball bearings

15 mm x 28 mm x 14 mm SNR ML71902CVDUJ74S angular contact ball bearings: Fillet Radius ra : 2.00 mm; Basic Dynamic Radial Load Rating C : 182000 N

17 mm x 30 mm x 14 mm SNR ML71903CVDUJ74S angular contact ball bearings

17 mm x 30 mm x 14 mm SNR ML71903CVDUJ74S angular contact ball bearings: RG : 1/4-28 UNF; Recommended tightening torque for grub screw : 7.4 N·m