self aligning ball bearings
In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.
Self-Aligning Double Row Ball Bearings are designed to work in applications where severe misalignment exists whether from mounting or shaft deflection. The concave raceway of the outer ring in combination with two rows of balls operate over a wide range of contact angles. Furthermore it aligns itself correctly with the shaft and assembly without causing undue stress on the rest of the bearing assembly.
Standard Self-Aligning Double Row Ball Bearings are produced with straight bores; however, tapered bores are available upon request. Noteworthy is that the self-aligning ball bearing has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds. Furthermore, the design allows for easy mounting and dismounting.
- 45 mm x 120 mm x 35 mm ISO 1409 self aligning ball bearings
- 0.00004 kg
- 240000 r/min
- Toyana 1308K self aligning ball bearings
- 8.1 in
- Medium Series
- 50 mm x 110 mm x 40 mm SKF 2310E-2RS1TN9 self aligning ball bearings
- CX
- 50 mm x 110 mm x 40 mm
- 100 mm x 180 mm x 46 mm NTN 2220SK self aligning ball bearings
- 4500 r/min
- 100 mm x 180 mm x 46 mm
- 101,6 mm x 215,9 mm x 44,45 mm RHP NMJ4 self aligning ball bearings
- 101,6 mm x 215,9 mm x 44,45 mm
- 40 mm