plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- 14 mm x 16 mm x 25 mm SKF PCM 141625 M plain bearings
- Medium Series
- Split Cylindrical Ex
- 25 mm x 47 mm x 28 mm SKF GEH 25 ES-2RS plain bearings
- 51.1 mm
- 167 mm
- 80 mm x 180 mm x 43,5 mm LS GX80N plain bearings
- No
- Used for Light load
- 420 mm x 560 mm x 190 mm LS GEC420XF/Q plain bearings
- Bearings with Housin
- [Steel] Steel
- 160 mm x 230 mm x 115 mm LS GEH160HT plain bearings
- 27.5 mm
- EX211-35G2L3
- LS SIK5C plain bearings
- Radial
- 6
- 20 mm x 35 mm x 16 mm LS GE20N plain bearings
- 54.2 kN
- 80 mm
- 280 mm x 430 mm x 210 mm LS GEG280XT-2RS plain bearings
- 15.5 mm
- 76 mm
- LS SI30C plain bearings
- 2100
- Single Row