plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- 18 mm x 42 mm x 23 mm IKO PB 18 plain bearings
- Bearings with Housin
- Flanged Pilot Type
- 80 mm x 120 mm x 55 mm IKO GE 80ES-2RS plain bearings
- Deep Groove Ball Bea
- Electroless Nickel P
- 260 mm x 370 mm x 150 mm IKO GE 260ES plain bearings
- 3.00 in
- 3-1/4 in
- 95 mm x 150 mm x 82 mm IKO SB 9515082 plain bearings
- 107.8 mm
- 131.5 mm
- 17 mm x 35 mm x 20 mm IKO GE 17GS plain bearings
- Cast Iron
- Round flange shape
- 35 mm x 55 mm x 35 mm FBJ GEEW35ES-2RS plain bearings
- 250 mm
- 140 mm
- AST AST20 12IB08 plain bearings
- Square Type
- No
- AST ASTEPBF 0608-06 plain bearings
- ZZ (Double Shield)
- Deep Groove Ball Bea
- AST ASTT90 11050 plain bearings
- 6.24 Hz
- -40 °C
- AST AST11 22080 plain bearings
- 0.41 Hz
- 0.0