plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- 120,65 mm x 187,33 mm x 105,56 mm ISB GEZ 120 ES 2RS plain bearings
- 0.06 in
- 2.0625 in
- 57,15 mm x 90,49 mm x 50,01 mm ISB GEZ 57 ES 2RS plain bearings
- 1045 Carbon Steel
- 12
- ISB TSM.R 10.1 plain bearings
- ZZ (Double Shield)
- 40 ～ 60
- ISB TSF.R 8 plain bearings
- 4.25 in
- 130 mm
- 38,1 mm x 61,91 mm x 33,33 mm ISB GEZ 38 ES plain bearings
- Standard Grease
- No Cover
- 60 mm x 90 mm x 54 mm ISB GEEM 60 ES 2RS plain bearings
- Flanged Type
- 5 ～ 20
- 200 mm x 320 mm x 165 mm ISB GEG 200 ET 2RS plain bearings
- 15.0 in
- 95993 lbf
- 20 mm x 23 mm x 25 mm INA EGB2025-E50 plain bearings
- Pillow Type
- 6
- 200 mm x 340 mm x 74 mm INA GE 200 AW plain bearings
- 5.84 Hz
- 25.4 mm
- 25 mm x 42 mm x 20 mm INA GE 25 DO-2RS plain bearings
- 46500
- G1 (high tensile bra