NTN BEARING USA CORP.

deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

4 mm x 8 mm x 2 mm ISB MF84ZZ deep groove ball bearings: d : 50 mm; F : 57 mm

70 mm x 110 mm x 20 mm ISB 6014-2RS deep groove ball bearings: Manufacturing Plant Location : Crossville, TN - DC; Bearing Duty : Normal Duty

2 mm x 6 mm x 2,3 mm ISB F692ZZ deep groove ball bearings: Retainer Material : Nylon; Grease Type : Unirex N2

105 mm x 190 mm x 36 mm ISB 6221-2RS deep groove ball bearings: D : 37 mm; Dynamic load, C : 9.7 kN

80 mm x 110 mm x 16 mm ISB SS 61916-2RS deep groove ball bearings: B : 15 mm; B1 : 28 mm

150 mm x 210 mm x 28 mm ISB 61930 MA deep groove ball bearings: Recommended tightening torque for set screw : 8 Nm; N : 14mm

70 mm x 90 mm x 10 mm ISB SS 61814-2RS deep groove ball bearings: C : 31.85 kN; A : 38 mm

10 mm x 19 mm x 7 mm ISB SS 63800-ZZ deep groove ball bearings: H1 : 14.5 mm; s1 : 19.05 mm

60 mm x 130 mm x 46 mm FAG 4312-B-TVH deep groove ball bearings: Ca max : 2.15 mm; rs min : 0.3 mm

55 mm x 90 mm x 18 mm FAG 6011-2Z deep groove ball bearings: N : 12mm; L : 100 mm

90 mm x 190 mm x 43 mm FAG 6318-2Z deep groove ball bearings: H : 167 mm; B : 36 mm

INA RAE35-NPP-B deep groove ball bearings: B : 34.8 mm; Dz : 60 mm

◂ Previous page Next page ▸

All Products Contact Now

Product Categories: angular contact ball bearings; bearing units; complex bearings; cylindrical roller bearings; deep groove ball bearings; linear bearings; needle roller bearings; plain bearings; self aligning ball bearings; spherical roller bearings; tapered roller bearings; thrust ball bearings; thrust roller bearings; wheel bearings; SKF Bearing; NTN 6211 Bearing; NTN 6300 Bearing; NTN Uc207 Bearing; Ucp213d1 Bearing