deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 45 mm x 85 mm x 49,2 mm KOYO ER209 deep groove ball bearings
- 12.8 kN
- 94.5 mm
- 55 mm x 90 mm x 18 mm KOYO 6011NR deep groove ball bearings
- 90 mm
- UC202G2L4
- 20 mm x 42 mm x 12 mm KOYO 3NC6004MD4 deep groove ball bearings
- 219.5 mm
- 170.5 mm
- 30 mm x 47 mm x 9 mm KOYO 6906ZZ deep groove ball bearings
- Steel
- Self Centering
- 4 mm x 13 mm x 5 mm SKF 624/HR22Q2 deep groove ball bearings
- 4547359530926
- B04334
- 190 mm x 340 mm x 55 mm SKF 6238 deep groove ball bearings
- 200 °C
- 2.54 kg
- 220 mm x 270 mm x 24 mm SKF 61844 deep groove ball bearings
- 200 mm
- 9.09 Hz