deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- SNR UK315 deep groove ball bearings
- 8 mm
- 15,000 rpm
- 85 mm x 150 mm x 28 mm NKE 6217-2RSR deep groove ball bearings
- 27.8 mm
- 58.4 mm
- 15 mm x 42 mm x 13 mm NKE 6302-2RS2 deep groove ball bearings
- 19.05 mm
- UC206-19G2L4
- 240 mm x 500 mm x 95 mm NKE 6348-M deep groove ball bearings
- 100 mm
- 20.7 mm
- 60 mm x 95 mm x 18 mm NKE 6012-NR deep groove ball bearings
- 264 mm
- 3.18 mm
- 12 mm x 32 mm x 10 mm NKE 6201-2Z deep groove ball bearings
- 2.5 mm
- 79.6 kN
- AST 6019 deep groove ball bearings
- PE203N-
- 46 mm