NTN BEARING USA CORP.

deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

30 mm x 62 mm x 16 mm CYSD 6206-ZZ deep groove ball bearings: Weight : 0.65 kg; L : 68 mm

51,181 mm x 100 mm x 33,325 mm CYSD GW211PPB14 deep groove ball bearings: Shaft Attachment (2) : Grip Tight; Ball Grade : Class 10

190 mm x 240 mm x 24 mm CYSD 6838N deep groove ball bearings: d1 : 62 mm; H : 53.9 mm

170 mm x 230 mm x 28 mm CYSD 6934-2RS deep groove ball bearings: Static load, C0 : 335 kN; Fatigue limit load, Cu : 35.6 kN

60 mm x 78 mm x 10 mm CYSD 6812-ZZ deep groove ball bearings: B : 30 mm; E : 18 mm

70 mm x 125 mm x 24 mm CYSD 6214-RS deep groove ball bearings: e : 9 mm; A2 : 32.5 mm

17 mm x 47 mm x 18 mm CYSD 88603 deep groove ball bearings: Seal Type : Single Lip; Bearing Series : 218 Series

65 mm x 85 mm x 10 mm CYSD 6813NR deep groove ball bearings: A4 : 33 mm; e : 14 mm

36,65 mm x 72 mm x 37,7 mm CYSD 207KPPB3 deep groove ball bearings: Recommended tightening torque for set screw : 3.2 Nm; A3 : 1.5 mm

75 mm x 115 mm x 20 mm CYSD 6015 deep groove ball bearings: Static load, C0 : 4.2 kN; Characteristic inner ring frequency, BPFI : 3.97 Hz

26 mm x 52 mm x 15,875 mm CYSD 87026 deep groove ball bearings: Characteristic outer ring frequency, BPF0 : 4.08 Hz; Inventory : 0.0

110 mm x 240 mm x 50 mm CYSD 6322-RS deep groove ball bearings: H : 89 mm; B : 31 mm