NTN BEARING USA CORP.

deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

9 mm x 24 mm x 7 mm ZEN SF609 deep groove ball bearings: Size (mm) : 9 mm x 24 mm x 7 mm

14,287 mm x 34,925 mm x 11,112 mm ZEN 1622-2Z deep groove ball bearings: s1 : 30.9 mm; L1 : 225 mm

40 mm x 68 mm x 15 mm ZEN P6008-GB deep groove ball bearings: Recommended tightening torque for set screw : 22 Nm; Weight : 5.06 kg

12 mm x 24 mm x 6 mm ZEN 61901-2RS deep groove ball bearings: Recommended tightening torque for set screw : 8 Nm; Z : 30 mm

10 mm x 19 mm x 5 mm ZEN S61800-2Z deep groove ball bearings: Recommended tightening torque for set screw : 64 Nm; H : 240 mm

7 mm x 14 mm x 5 mm ZEN S687-2Z deep groove ball bearings: Characteristic rolling element frequency, BSF : 7.49 Hz; f0 : 15.6

20 mm x 47 mm x 14 mm ZEN P6204-GB deep groove ball bearings: Fatigue limit load, Cu : 144 kN; Da max : 303 mm

5 mm x 16 mm x 5 mm ZEN 625-2Z.T9H.C3 deep groove ball bearings: J : 140 mm; A2 : 71 mm

8 mm x 24 mm x 8 mm ZEN 628-2Z deep groove ball bearings: Characteristic cage frequency, FTF : 0.42 Hz; Weight / Kilogram : 1.185

7 mm x 19 mm x 6 mm ZEN 607-2Z.T9H.C3 deep groove ball bearings: C : 43.55 kN; S : 22.2 mm

8 mm x 28 mm x 9 mm ZEN S638-2RS deep groove ball bearings: f0 : 12.9; Nlim : 16,000 rpm

15 mm x 32 mm x 8 mm ZEN 16002 deep groove ball bearings: B1 : 66 mm; e : 37 mm