deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 17 mm x 40 mm x 12 mm PFI 6203-TT C3 deep groove ball bearings
- N/A
- 1.85 Inch | 47 Milli
- 10 mm x 27 mm x 11 mm PFI B10-51D deep groove ball bearings
- 100 °C
- 34.1 mm
- 10 mm x 30 mm x 9 mm PFI 6200-ZZ NR C3 deep groove ball bearings
- FCE212-
- 32.8 kN
- 65 mm x 140 mm x 33 mm PFI 6313-2RS C3 deep groove ball bearings
- Not Applicable
- Steel
- 30 mm x 62 mm x 16 mm PFI 6206-2RS C3 deep groove ball bearings
- Setscrew
- Setscrew Ball Bearin
- 8 mm x 22 mm x 7 mm Fersa 608-2RS deep groove ball bearings
- 42.86 mm
- 31.85 kN
- Fersa F15140 deep groove ball bearings
- SCOE210-50
- SCCE210
- Fersa F18013 deep groove ball bearings
- Rubberized
- Expansion