NTN BEARING USA CORP.

deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

105 mm x 190 mm x 36 mm KOYO 6221ZX deep groove ball bearings: d : 36.51 mm; C : 25.7 kN

3.175 mm x 9.525 mm x 4.762 mm SKF D/W RW2 R deep groove ball bearings: C0 : 23.2 kN; L : 200 mm

30 mm x 72 mm x 19 mm SKF 6306/VA201 deep groove ball bearings: Housing Coating : No Coating; Retainer Type : Max Life Cage

170 mm x 260 mm x 42 mm SKF 6034 M deep groove ball bearings: L1 : 47 mm; Recommended tightening torque for set screw : 8 Nm

12 mm x 28 mm x 8 mm SKF 6001/HR11QN deep groove ball bearings: Bearing Insert Material : Steel; Bearing Locking Device : Setscrew

70 mm x 100 mm x 16 mm SKF W 61914-2Z deep groove ball bearings: Bearing Insert Material : Steel; Seal Type : Single Lip

70 mm x 110 mm x 20 mm SKF 6014-2RS1 deep groove ball bearings: Ball Grade : Class 10; Seal Type : Single Lip

75 mm x 115 mm x 20 mm SKF 6015-Z deep groove ball bearings: d : 35 mm; L : 117 mm

1,500 mm x 5,000 mm x 2,000 mm NTN F-W69/15ASSA deep groove ball bearings: E : 15 mm; d : 22.22 mm

30 mm x 55 mm x 13 mm NTN TMB006LLHAC3PX16#01 deep groove ball bearings: N1 : 16 mm; C : 25.7 kN

65,000 mm x 120,000 mm x 23,000 mm NTN 6213LLUNR deep groove ball bearings: T min. : -20 °C; Weight : 1.4 kg

20 mm x 27 mm x 4 mm NTN 6704LLF deep groove ball bearings: S : 8.5 mm; s1 : 16 mm