NTN BEARING USA CORP.

deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

90 mm x 160 mm x 30 mm NACHI 6218ZZ deep groove ball bearings: r : 2; Recommended tightening torque for set screw : 33 Nm

35 mm x 72 mm x 26 mm NACHI 35BCDS2A1 deep groove ball bearings: SW : 3.18 mm; H : 89 mm

45 mm x 85 mm x 42,86 mm Timken GE45KRRB deep groove ball bearings: J : 120.5 mm; A : 10 mm

69,85 mm x 104,775 mm x 17,46 mm Timken XLS44K deep groove ball bearings: Shaft Attachment (2) : D-Lock; Brand : Baldor-Dodge

42,8625 mm x 85 mm x 42,86 mm Timken SM1111KB deep groove ball bearings: Weight : 3.1 kg; T min. : -40 °C

75 mm x 115 mm x 20 mm Timken 9115KDD deep groove ball bearings: Designation of bearing : EX315-47G2L3; A1 : 30 mm

10 mm x 26 mm x 8 mm Timken 9100KDD deep groove ball bearings: Category : Bearings; Fatigue limit load, Cu : 9 kN

26,9875 mm x 55 mm x 18,27 mm Timken RAL101NPPB deep groove ball bearings: Static load, C0 : 29.3 kN; d1 : 65.4 mm

20 mm x 47 mm x 14 mm NSK L 20 deep groove ball bearings: Recommended tightening torque for set screw : 5.5 Nm; Designation of bearing : EX202G2L3

6 mm x 12 mm x 3 mm NSK MF126 deep groove ball bearings: f0 : 12.8; d : 17 mm

3,175 mm x 9,525 mm x 3,967 mm NSK R 2 ZZ deep groove ball bearings: Bearing Series : 206 Series; Flinger Type : INTERNAL RUBBER LIP

5 mm x 14 mm x 5 mm ISO 605 deep groove ball bearings: Dynamic load, C : 35.5 kN; Characteristic outer ring frequency, BPF0 : 5.12 Hz