NTN BEARING USA CORP.

deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

9 mm x 24 mm x 7 mm ZEN SF609-2Z deep groove ball bearings: G : R1/8"; J : 143.5 mm

3,175 mm x 12,7 mm x 4,366 mm ZEN SR2A-2Z deep groove ball bearings: N : 11mm; Designation of open end cover : SCO204-17

65 mm x 90 mm x 13 mm FBJ 6913 deep groove ball bearings: Recommended tightening torque for set screw : 5.5 Nm; H : 27 mm

3 mm x 9 mm x 5 mm FBJ F603ZZ deep groove ball bearings: d : 15.88 mm; S : 6.5 mm

8 mm x 22 mm x 7 mm FBJ F608ZZ deep groove ball bearings: Brand : Baldor-Dodge; Shaft Attachment (2) : Set Screw

22,225 mm x 50,8 mm x 14,2875 mm FBJ 1640 deep groove ball bearings: A2 : 91.9 mm; J : 165 mm

6,35 mm x 17,4625 mm x 6,35 mm FBJ 1602-2RS deep groove ball bearings: C0 : 20.8 kN; N : 15mm

2 mm x 6 mm x 2,5 mm FBJ MF62 deep groove ball bearings: Size (mm) : 2 mm x 6 mm x 2,5 mm

3 mm x 6 mm x 2,5 mm FBJ MR63ZZ deep groove ball bearings: Base to Center Height : Not Applicable; Bearing Bore Shape : Round

15 mm x 24 mm x 5 mm FBJ 6802 deep groove ball bearings: Characteristic rolling element frequency, BSF : 7.87 Hz; Characteristic outer ring frequency, BPF0 : 6.56 Hz

140 mm x 175 mm x 18 mm CYSD 6828-ZZ deep groove ball bearings: Designation of housing : FLE213-; A1 : 18 mm

140 mm x 250 mm x 42 mm CYSD 6228-ZZ deep groove ball bearings: T max. : 100 °C; A1 : 94 mm