deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 10 mm x 35 mm x 11 mm Timken 300P deep groove ball bearings
- 1.1875 in
- Non-Expansion
- 17 mm x 35 mm x 10 mm NSK 6003VV deep groove ball bearings
- 98.4 mm
- PP204-
- 105 mm x 130 mm x 13 mm NSK 6821ZZ deep groove ball bearings
- No
- Powder Coat
- 75 mm x 105 mm x 16 mm NSK 6915 deep groove ball bearings
- 104.26 kN
- 26 mm
- 8 mm x 14 mm x 4 mm NSK MF148DD deep groove ball bearings
- 0.6 mm
- 248 N/µm
- 4 mm x 12 mm x 4 mm ISO F604ZZ deep groove ball bearings
- 38 mm
- 36.5 mm
- 2 mm x 6 mm x 2,5 mm ISO MF62 deep groove ball bearings
- 14.3 mm
- 200 °C
- 2 mm x 7 mm x 2,5 mm ISO MF72 deep groove ball bearings
- 3.92 kg
- R1/8"