angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- Timken 202DTVL723 angular contact ball bearings
- 38000 N
- 97500 N
- 85 mm x 120 mm x 18 mm NSK 85BNR19H angular contact ball bearings
- 4800 rpm
- Without Accessories
- 280 mm x 380 mm x 46 mm NSK 7956A angular contact ball bearings
- 185 kN
- 120.65 mm
- 40 mm x 76 mm x 33 mm NSK 40BWD08A angular contact ball bearings
- 0.84 lb
- 2.8346 in
- 95 mm x 130 mm x 18 mm NSK 7919 A5 angular contact ball bearings
- 175.2 mm
- 145 mm
- 43 mm x 83 mm x 42,5 mm NSK 43BWK03D angular contact ball bearings
- 45.000 mm
- 100.0000 mm