angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 45 mm x 84 mm x 42 mm FAG SA0050 angular contact ball bearings
- 2 x B10724-122
- 2 x 3/8-16 UNC
- 43 mm x 82 mm x 37 mm FAG 567519A angular contact ball bearings
- 48.2 kN
- 5.770 kN
- 15 mm x 42 mm x 25 mm INA ZKLFA1563-2Z angular contact ball bearings
- 54.788 mm
- S 111x2
- 12 mm x 35,45 mm x 20 mm INA ZKLR1244-2RS angular contact ball bearings
- 1.00 mm
- One Shield
- NACHI F30BVV09-3 angular contact ball bearings
- 90.0000 mm
- 44200 N
- 12 mm x 24 mm x 6 mm NACHI 7901AC angular contact ball bearings
- 173000 N
- 170.000 mm
- 105 mm x 190 mm x 36 mm NACHI 7221 angular contact ball bearings
- 3.00 mm
- 1400 rpm