angular contact ball bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 120 mm x 180 mm x 28 mm SNFA VEX 120 /S 7CE1 angular contact ball bearings
- 29.00 mm
- 12900 rpm
- 100 mm x 140 mm x 20 mm SNFA VEB 100 /NS 7CE3 angular contact ball bearings
- 66.675 mm
- 173.037 mm
- 37 mm x 74 mm x 45 mm Fersa F16032 angular contact ball bearings
- 180.000 mm
- 280.0000 mm
- 40 mm x 84,06 mm x 38,8 mm Fersa F16108 angular contact ball bearings
- 89 kN
- 2 x 3/8-16 UNC
- 139,7 mm x 279,4 mm x 50,8 mm SIGMA MJT 5.1/2 angular contact ball bearings
- 200.0000 mm
- 110.000 mm
- 45 mm x 100 mm x 25 mm CYSD 7309CDT angular contact ball bearings
- 8000 rpm
- Two Shields & Snap-R